Search
Close this search box.

Course Tuition

Tuition and welding supplies (if applicable) must be paid in full before the student starts the first day of class unless a funding commitment letter has been received from a pre-approved outside funding source or agency for the tuition. LWT accepts cashier’s checks, money orders, checks, Visa, MasterCard and Discover (nonrefundable 3% convenience fee for all credit card purchases).

All required documents and payment arrangements are preferred to be received two weeks prior to the start date.

If a student is utilizing GI Bill® benefits, LWT will not require the student to pay the tuition or supplies cost that the VA intends on paying for within 90 days of the VA Certification for Enrollment done by the School Certifying Official. If a student is utilizing GI Bill® benefits, LWT will not require the student to pay the tuition or supplies cost that the VA intends to pay for within 90 days of the VA Certification for Enrollment done by the School Certifying Official. ‘‘GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). More information about education benefits offered by VA is available at the official U.S. government Web site at https://www.benefits.va.gov/gibill.”

Tuition is based on the course length and time of day. Tuition is as follows for 2023 – 2024:

1 week (40 hours) Course                 $1,575.00 – $2,200.00
2 weeks (80 hours) Course               $2,950.00
3 weeks (120 hours) Course             $4,300.00
5 weeks (200 hours) Course             $6,565.00
5 weeks (200 hours) Pipe Course   $8.350.00
12 weeks (480 hours) Course           $15,100.00
16 weeks (640 hours) Course           $17,900.00

Please note that Specialty Classes have different pricing, please refer to the Specialty Classes section for pricing or contact the school for more information.

Supplies

Leather steel toe boots are also required but are not available to purchase through the school.

Students are also required to purchase a grinder for the Pipe Skills Courses and the Combination Welder I and II Programs (It is recommended an 11 amp, 11,000 RMP, 4.5” grinder be purchased).  Please note, ALL grinders must have a safety guard.

All students are required to have the following supplies at the beginning of their class:  welding jacket, welding gloves, safety glasses, auto darkening helmet with extra lenses, welders cap, fillet weld gage, and welper pliers.  These can be purchased through the school if the student so desires and arranges with the school.

If the student chooses to have the school prepare the supplies for them for the first day, LWT offers a Safety Gear Package.

Safety Gear Package $750.00 Sizes Medium – 5XL

  • This package includes an industrial duffle bag, Viking(tm) black 3350 auto-darkening helmet, Welding Face Shield, Shadow(tm) Split Leather-Sleeved Jacket, a pair of Premium Gloves, a pair of all traditional Mig/Stick welding gloves, a pair of Tig gloves, Finish Line(tm) Clear Safety Glasses, a welders cap, Split Leather fire resistant welding sleeves, fillet weld gage, welper pliers, pipe wedge, tape measure and an aluminized pad for over the gloves.

Please note that once the Safety Gear Package have been purchased, they are nonrefundable, and all sales are final.

Disbursement of Safety Gear Packages (if purchased through LWT) and books will be provided to students on first day of instruction.