Apply for financial aid now! Fargo Campus ONLY

FAFSA

Our Fargo location is now accepting financial aid from those who qualify. Visit https://fafsa.ed.gov/ to fill out an application or contact our financial aid department at 701-373-0658.

GI Bill can now be used for all Programs 3 weeks and longer!

The-Post-911-GI-Bill-Ten-Facts-25305_572x248

We are happy to announce that your GI bill can now be used for any of our Programs 3 weeks and longer! If you are interested in doing this and have questions, speak to your local education Veteran Representative or contact our school at (701)373-0658.

More information regarding Veteran benefits can be found at http://www.benefits.va.gov/gibill/

GI BILL

Introducing Our Downhill Pipe Course!

072

100

Learn proper techniques and electrode selection for welding pipe to meet the API – 1104 (vertical down) welding code. You will be welding with E6010 & 7010 electrodes.

Prerequisites; Must complete our 80 hour SMAW Pre-pipe course or will be required to weld a sample weld before being permitted to start course.

PIPSTKD1
Prepares students for entry-level employment as a SMAW-Stick downhill pipe welder on mild steel with the ability to read and understand welding symbols, blueprints, and pipe layout for fitter and welders.

Course Description - The welding discipline covered in this course instructs students in welding safety of the SMAW – stick process, proper techniques and electrode selection for welding pipe to meet the API – 1104 (vertical down) welding code. Students will be welding with E6010 and E7010 electrodes. This course includes blueprint reading instruction and pipe layout for pipe fitters and welders. Completion of this course prepares the student with the skills for taking the 6G weld test to API – 1104 standards.

Training – Week 1 – Safety, electrode selection, proper preparation and fit-up of pipe. Oxy-acetylene safety and cutting techniques for pipe, 6″ sch, 40 pipe 2G and 5G position. Week 2 – 6″ sch. 40 pipe 5G and 6G position. Week 3 – 4″ sch. 40 pipe 2G, 5G, and 6G position, pipe layout for fitters and welders. Week 5 – 2″ sch. 80. pipe 2G, 5G, and 6G position.

Upon successful completion of this course the student should be: Diversified in the SMAW downhill pipe welding process on mild steel pipe.

Equipped with the skills for the 6G weld test to API – 1104 standards

Able to read pipe fitters prints

March 2014 Newsletter

March 2014
Have a good day!

Welding Scholarships!

The American Welding Society offers a welding scholarship every year! For more information visit: http://www.aws.org/w/a/foundation/district_scholarships.html
Deadline is March 1st

December 2013 Newsletter

LWT Newsletter December 2013